Zenesis
Dry Core Bit
Zenesis Black Dry Core 1-3/8″
Granite · hard aggregate · dry cutting
ZDGUL035B4-DSO-GT
$154.99
View product
Core bits, adapters, extensions and rigs for clean penetration work in reinforced concrete, block, and stone.
Built for utility, plumbing, and structural penetration work. Call to spec diameter range and reinforcement level.
Small penetrations for plumbing, conduit and utility rough-in: wet Medusa bits 1-1/2" to 3-1/2", a dry bit and the adapters to run them.
6 parts · See what's inside
$638.94 in parts Save $64
HVAC, plumbing, structural and electrical runs: wet Medusa bits 2" to 8", Z Thin Wall bits, a slurry ring and an adapter.
10 parts · See what's inside
$1,844.90 in parts Save $185
Large-diameter openings in post-tension and heavy-rebar slabs: the Diamond Products Anchor rig with motor, wet Medusa bits 4" to 14" and a slurry ring.
8 parts · See what's inside
$6,802.92 in parts Save $680
Real part numbers and current pricing. In-stock items ship same day when ordered by 2pm PST, free to the lower 48.
Zenesis
Dry Core Bit
Granite · hard aggregate · dry cutting
ZDGUL035B4-DSO-GT
Wet Core Bit
Copper Zenesis · brazed side protection
C-ZEN-1375-ZTW-DSO-GT
Wet Core Bit
Thin kerf · faster penetration
C-ZEN-15-ZTW-DSO-GT
Finger Bit
7 segment · 1-5/8″ · 1/2″ gas
C-ZFBS02040A7-DSO-GT
1-1/4 Thread
Male to female · bit to drill
A-COR-5811-114-PT
1-1/4 Thread
Extend reach on wet core bits
A-COR-114-6-E-PT
5/8-11 Male
Threaded arbor to SDS-Plus shank
A-SDS-5811-PT
5/8-11 Thread
Threaded arbor to SDS-Max
A-SDS-5811-MS-PT
1-1/4 Thread
DD250 · DD160 · DCM1.5
A-HILT-114-SP-PT
Quote
Diamond Products
Core Bore motor · 3 speed · up to 14″
4245113-DPWe stock 447 core bit part numbers. These are the sizes crews reorder most: call for anything from 1″ to 20″.
| Size | Bit | Thread | Part number | Price |
|---|---|---|---|---|
| 1-1/2″ | Medusa zig-zag · 10 bond · purple | 1-1/4 thread | C-MED-15-125-114-ZZ-GT | $70 |
| 1-3/4″ | Medusa zig-zag · 10 bond · purple | 1-1/4 thread | C-MED-175-125-114-ZZ-GT | $85 |
| 2″ | Medusa zig-zag · 10 bond · purple | 1-1/4 thread | C-MED-2-155-114-ZZ-GT | $110 |
| 2-3/4″ | Medusa zig-zag · 10 bond · purple | 1-1/4 thread | C-MED-375-125-114-ZZ-GT | $130 |
| 3-1/2″ | Medusa zig-zag · 10 bond · purple | 1-1/4 thread | C-MED-35-155-114-ZZ-GT | $175 |
| 1-1/2″ | 10 bond pro prestress · 14″ tube | 1-1/4 thread | C-10B-15-DSO-GT | $65 |
| 1-1/4″ | Double point · W segment | 5/8-11 thread | C-DOP-125-5811-SH | $110 |
| 11″ | Fast cut double point · wet | 1-1/4 thread | C-DOP-11-SH | $770 |
Photography for the bit range is still being shot, so these are listed by spec rather than shown with a stand-in picture. Ask for a size that isn’t listed.
Sizes, bonds and arbors beyond the lineup above. Tell us the saw and the material, and we will spec it.